Products
LOCTITE 222
LOCTITE 243-0.5ML
Threadlocking Adhesive - Medium strength. General purpose. Suitable for all metal threaded assemblies. LOCTITE 243 is a general purpose threadlocker of medium strength. This threadlocker secures and seals bolts, nuts and studs to prevent loosening due to vibration in assemblies like pump, motor mounting bolts, gearboxes or presses
- Medium Strength Oil Tolerant
- Thread Sizes M6 to M20
- 180°C Service Temperature
LOCTITE 262
LOCTITE® 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils.
- Suitable for all metal fasteners
- Medium to High Strength
- Thixotropic
LOCTITE 515
Loctite 515 is a medium strength (6 N/mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.
- Ideal for machined metal components
- Perfect seal between components
- For gaps up to 0.25 mm
LOCTITE 518-50 ML TUBE
LOCTITE 518 is designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Typical applications include sealing close fittings on transmissions, motor housings etc.Read less
- Fills Gaps upto 0.25 mm
- Better Flexibility
- 150°C Service Temperature
LOCTITE 574-50 ML TUBE
LOCTITE 574 seals close-fitting joints between rigid and semi-rigid metal faces and flanges. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
- Fills Gaps upto 0.25 mm
- High Oil Resistance
- 150°C Service Temperature
LOCTITE SI 5366 310ML
LOCTITE® SI 5366 is a 1-part, clear industrial acetoxy silicone sealant/adhesive, designed to ensure perfect sealing, bonding and protection. Typical applications include sealing side windows in trains, sealing heat sources (ovens, heat exchangers, steam circuits, water heaters), providing protection/insulation of electrical boxes, bonding of HCR silicones and general maintenance.
- Industrial acetoxy silicone
- Perfect sealing
- High elongation at break
LOCTITE SI 5699
LOCTITE® SI 5699 is a flexible silicone sealant which cures on exposure to moisture in the air to form a tough rubber gasket. It is designed primarily for flange sealing with excellent oil resistance or rigid flange sealing e.g. on transmissions, cast metal housings. It is tack-free after just 10 min. The water-glycol resistant product can be used on machined or cast surfaces, metal or plastic.
- Flexible Silicone Sealant
- Tough Rubber Gasket
- Excellent Oil Resistance
LOCTITE SI 5910
LOCTITE® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).
- Low Strength
- Used for flexible flanges
- Reduces migration of liquid
LOCTITE SI 595
LOCTITE® SI 595 is a clear, 1-part, thixotropic, room temperature vulcanizing, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odour. It is designed as an excellent adhesive sealant for mechanical assemblies. Typical applications include electrical insulation, protection of leads from mechanical shock, trim bonding, and sealing of ductwork, vents, flues, doors, and windows.
- Thixotropic
- Excellent for mechanical assemblies
- Room Temperature Vulcanizing